




Commercial Ultrasonic Cleaners
10L Digital Ultrasonic Cleaner with Heater and Degas
10L digital ultrasonic cleaner with heater and degas for dental, jewellery, lab and parts cleaning. SUS304 one-piece tank. Contact us for specs and samples.
Specifications
- Capacity
- 10 L (2.6 gal)
- Ultrasonic power
- 240 W
- Heating power
- 300 W
- Tank size
- 300 × 235 × 150 mm (11.8 × 9.3 × 5.9 in)
- Unit size
- 330 × 270 × 275 mm (13.0 × 10.6 × 10.8 in)
- Timer
- 1–30 minutes
- Temperature
- Room temperature to 80 °C
- Tank material
- SUS304 stainless steel
- Degas function
- Yes
- Basket
- Stainless steel cleaning basket included
The DS-D 10L is a benchtop digital ultrasonic cleaner with heater and degas, built for professional users who clean parts and instruments every day. Its 240 W ultrasonic power, heating to 80 °C and 10 litre SUS304 tank lift oil, carbon deposits, polishing compound and flux residue out of blind holes, threads and fine detail that brushes cannot reach.
240 W ultrasonic power from four industrial transducers
Four industrial-grade transducers bonded under the tank spread cavitation evenly across the full working volume, so this ultrasonic parts cleaner degreases carburettors, fuel injectors and small machine components without dead spots or manual scrubbing.

One-piece SUS304 tank, drawn with no welds
The tank is pressed in one piece from 1.1 mm SUS304 stainless steel. With no welds or seams inside, there is nowhere for residue to hide, and the tank resists corrosion from daily detergent use in labs, clinics and workshops.

Heating to 80 °C with degas mode
Heat softens grease and dried contaminants so the ultrasonic action works faster, while degas mode sweeps dissolved air out of fresh solution — the setting that makes this digital ultrasonic cleaner effective on fine jewellery chains, watch parts and optical components with intricate detail.
Digital control and a drain valve for daily work
LED displays and push-button controls set the timer from 1 to 30 minutes and the temperature at a glance. A side drain valve empties the tank without lifting it, and the stainless steel basket is included for loading small parts safely.

What it cleans
In dental and medical settings it works as an ultrasonic cleaner for dental instruments, burs and prosthetic parts before sterilisation. Jewellery workshops use it as a bench ultrasonic jewellery cleaner, repair shops as an ultrasonic cleaner for carburettor, injector and chain cleaning, and laboratories as a laboratory ultrasonic cleaner for glassware, nozzles and precision components.
Workshops use the 10L tank for batch washing of hardware parts, moulds and workshop tools, cleaning several pieces in one load instead of one at a time. For dental and medical instruments, ultrasonic cleaning is a pre-cleaning step before disinfection and sterilisation, not a substitute for them. Carburettors and fuel injectors benefit from the same full-volume cavitation, with solution reaching internal passages that a brush cannot reach.
Built for Daily Use
The tank is a one-piece SUS304 stainless steel tank, stamped in one piece with no welds inside, so residue has nowhere to hide. Transducers bonded under the tank bottom spread cavitation evenly, and the stainless steel cleaning basket is included as standard. The digital model adds heating from room temperature to 80 degrees C and a degas function, with a timer from 1 to 30 minutes. It is certified to CE, FCC, RoHS, UKCA, PSE and UL, and controlled by a digital panel with LED displays.
To request the full specification sheet or a sample, send an inquiry through the form on
this page. Mob / WhatsApp / WeChat: +86 15920036975. Private label and OEM are available from 300 units, and units ship in neutral packaging.



