Tall-body ultrasonic cleaners in several sizes
An exploded view of an ultrasonic cleaner showing its internal parts
Industrial ultrasonic transducers bonded under a stainless steel tank
Ultrasonic cleaner cleaning metal parts in a basket
Commercial Ultrasonic Cleaners

Tall-Body Ultrasonic Cleaner for Long Parts — 2L to 30L

Tall-body ultrasonic cleaner with degas and heater, 2L to 30L — deeper tanks for long tools, bottles and moulds that standard tanks cannot take. OEM available.

Specifications

Capacity
2–30 L by model
Ultrasonic power
60–600 W by model
Heating power
100–600 W by model
Power modes
Half wave / full wave
Timer
1–30 minutes
Temperature
Room temperature to 80 °C
Tank material
SUS304 stainless steel
Control
Digital control with LED displays
Basket
Stainless steel basket included
Packaging
Neutral packaging
Private label
OEM / private label from 300 units
Certifications
CE, FCC, RoHS, UKCA, PSE, UL
The DS-H series is a tall-body ultrasonic cleaner: the same digital platform with heating, degas and dual power modes, built into a deeper body from 2 to 30 litres. It exists for the parts that standard tanks are too shallow to take.
Full per-model dimensions are in the specification sheet we send with every quotation.



Depth for long and tall parts
Long tools, laboratory bottles, tall moulds and vertical assemblies submerge fully instead of sticking out of the solution, so every surface gets cleaned in one cycle.



Half wave for delicate, full wave for grease
Switch between half-wave and full-wave ultrasonic output: gentle action for delicate pieces, full power for oil, carbon and polishing compound. Degas mode prepares fresh solution for fine work.
Heating to 80 °C

Heat softens grease and dried contaminants so the ultrasonic action works faster, and the timer runs from 1 to 30 minutes for repeatable cycles.

One-piece SUS304 tank, drawn with no welds

Every size uses a tank pressed in one piece from SUS304 stainless steel, with no welds or seams inside to trap residue, and a stainless steel basket is included.



What it cleans

Long hand tools and shafts, laboratory glassware and bottles, tall moulds and dies, dental and medical trays, and batches of smaller parts in a single load.

Made for taller parts

The taller body is the point of the DS-H: the tank is deeper than a standard cleaner, so long and tall parts sit fully under the solution instead of sticking out. Laboratory bottles and tall glassware stand upright and submerge to the neck, long-handled tools and shafts lie flat or stand without their handles poking out, spray guns fit in whole with their cups and nozzles covered, and taller components such as moulds, dies and vertical assemblies go in upright so every face meets the ultrasonic field. The deeper tank also keeps tall parts upright during the cycle, so they do not tip over or rest against the tank wall while they are cleaned. With sizes from 2 to 30 litres, a bench can take a small tank for bottles and hand tools and a workshop can run a larger tank for long shafts and tall moulds, all on the same digital platform.

Degas and dual wave modes

Degas mode sweeps dissolved air out of fresh solution before a cycle, so cavitation forms evenly across the deeper tank instead of fading where air is trapped. Half wave gives a gentler action for polished metal, plated finishes and delicate parts that full power would mark, while full wave drives cavitation at full strength for oil, carbon and polishing compound. The heater, adjustable from room temperature to 80 °C, softens grease first so both power modes work faster. Workshops use the DS-H for long tools and shafts, laboratories for bottles and glassware, and clinics for instruments before sterilisation, where cleaning is a pre-sterilisation step and not a substitute for sterilisation itself. Every size uses a one-piece SUS304 tank with no welds or seams inside, ships with a stainless steel basket included in neutral packaging, and private label and OEM orders start from 300 units. The digital control with LED displays keeps the timer and the temperature easy to read, so the same cycle can be repeated from one batch to the next.


To request the full specification sheet or a sample, send an inquiry through the form on this page. Mob / WhatsApp / WeChat: +86 15920036975. Private label and OEM are available from 300 units, and units ship in neutral packaging.

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.