



Commercial Ultrasonic Cleaners
Dual Power Ultrasonic Cleaner with Degas — 1.3L to 30L
Ultrasonic cleaner with switchable half-wave and full-wave power, degas and heater, 1.3L to 30L — gentle or strong at the turn of a setting. OEM available.
Specifications
- Capacity
- 1.3–30 L by model
- Ultrasonic power
- 60–600 W by model
- Heating power
- 100–600 W by model
- Power modes
- Half wave / full wave
- Timer
- 1–30 minutes
- Temperature
- Room temperature to 80 °C
- Tank material
- SUS304 stainless steel
- Control
- Digital control with LED displays
- Basket
- Stainless steel basket included
- Packaging
- Neutral packaging
- Private label
- OEM / private label from 300 units
- Certifications
- CE, FCC, RoHS, UKCA, PSE, UL
The DS-P series is a dual power ultrasonic cleaner with degas and heater, in nine sizes from 1.3 to 30 litres. Its party trick is switchable ultrasonic output: half wave for delicate work, full wave for heavy soil, on the same machine.
Full per-model dimensions are in the specification sheet we send with every quotation.
Two power levels in one tank
Full-wave output drives cavitation at full strength for degreasing and carbon removal. Half-wave softens the action for polished surfaces, coated parts and fine assemblies that full power would mark.
Degas mode for fine work
Degas sweeps dissolved air out of fresh solution, so cavitation forms evenly — the setting that matters for jewellery chains, optical parts and precision components.
Heating to 80 °C
Heat softens grease and dried contaminants so both power modes work faster, and the timer runs from 1 to 30 minutes for repeatable cycles.
One-piece SUS304 tank, drawn with no welds
Every size uses a tank pressed in one piece from SUS304 stainless steel, with no welds or seams inside to trap residue, and a stainless steel basket is included.

What it cleans
Carburettors, fuel injectors and chains in repair shops; dental and laboratory instruments; PCB assemblies and electronic parts at low power; jewellery and watch parts.
Where the DS-P fits
Auto repair workshops clean carburettors and fuel injectors on full wave, then switch to half wave for polished and plated parts that full power would mark. Jewellery workshops clean chains, rings and watch parts, and dental practices and clinics clean instruments before sterilisation, where cleaning is a pre-sterilisation step and not a substitute for sterilisation itself. Electronics benches clean printed circuit boards and small assemblies at low power, clearing flux residue and dust from between components. Hardware workshops clean bolts, fittings and hand tools before assembly or inspection, and laboratories clean glassware and small instruments.
Half wave, full wave and degas
Half wave gives a gentler action for polished metal, plated finishes, jewellery and circuit boards, while full wave drives cavitation at full strength for oil, carbon and polishing compound on workshop parts. Degas mode sweeps dissolved air out of fresh solution before fine work, so cavitation forms evenly across the tank. The heater, adjustable from room temperature to 80 C, softens grease first so both power modes work faster. The one-piece SUS304 tank has no welds or seams inside to trap residue, and a stainless steel basket is included with every size. Digital control with LED displays keeps the timer and temperature easy to read.
Ready for commercial orders
The DS-P carries CE, FCC, RoHS, UKCA, PSE and UL certifications, and every size ships in neutral packaging with a stainless steel basket included. Private label and OEM orders start from 300 units, so distributors and brands can put their own name on the machine and the carton. Nine sizes, from 1.3 to 30 litres, cover a single bench and a full workshop line from the same range.
To request the full specification sheet or a sample, send an inquiry through the form on this page. Mob / WhatsApp / WeChat: +86 15920036975. Private label and OEM are available from 300 units, and units ship in neutral packaging.



