





Commercial Ultrasonic Cleaners
15L Digital Ultrasonic Cleaner with Heater and Degas
15L digital ultrasonic cleaner with heater, degas and drain valve. 360 W ultrasonic power, SUS304 tank — for parts, carburettors and workshop cleaning. OEM available.
Specifications
- Capacity
- 15 L (4.0 gal)
- Ultrasonic power
- 360 W
- Heating power
- 450 W
- Tank size
- 325 × 300 × 155 mm (12.8 × 11.8 × 6.1 in)
- Unit size
- 355 × 325 × 275 mm (14.0 × 12.8 × 10.8 in)
- Timer
- 1–30 minutes
- Temperature
- Room temperature to 80 °C
- Tank material
- SUS304 stainless steel
- Degas
- Yes
- Basket
- Stainless steel basket included
The DS-D 15L is a benchtop digital ultrasonic cleaner with heater and degas for workshops and service departments with a daily flow of greasy parts. Its 360 W ultrasonic power, heating to 80 °C and 15 litre SUS304 tank lift oil, carbon deposits and polishing compound out of blind holes, threads and fine detail that brushes cannot reach.
360 W ultrasonic power from six industrial transducers
Six industrial-grade transducers bonded under the tank spread cavitation evenly across the full working volume, so this ultrasonic parts cleaner degreases carburettors, fuel injectors and machine components without dead spots or manual scrubbing.

One-piece SUS304 tank, drawn with no welds
The tank is pressed in one piece from 1.1 mm SUS304 stainless steel. With no welds or seams inside, there is nowhere for residue to hide, and the tank resists corrosion from daily detergent use in labs, clinics and workshops.

Heating to 80 °C with degas mode
Heat softens grease and dried contaminants so the ultrasonic action works faster, while degas mode sweeps dissolved air out of fresh solution for a more even clean on intricate parts.
Digital control and a drain valve for daily work
LED displays and push-button controls set the timer from 1 to 30 minutes and the temperature at a glance. A side drain valve empties the tank without lifting it, and the stainless steel basket is included for loading parts safely.

What it cleans
Repair shops use it as an ultrasonic cleaner for carburettor, injector, chain and bearing cleaning; dental and medical departments clean instruments and prosthetic parts before sterilisation; laboratories use it as a laboratory ultrasonic cleaner for glassware and components; and workshops degrease moulds, nozzles and small machine parts.
Workshops use the 15L tank for batch washing of hardware parts, moulds and workshop tools, cleaning several pieces in one load instead of one at a time. For dental and medical instruments, ultrasonic cleaning is a pre-cleaning step before disinfection and sterilisation, not a substitute for them. Carburettors and fuel injectors benefit from the same full-volume cavitation, with solution reaching internal passages that a brush cannot reach.
Built for Daily Use
The tank is a one-piece SUS304 stainless steel tank, stamped in one piece with no welds inside, so residue has nowhere to hide. Transducers bonded under the tank bottom spread cavitation evenly, and the stainless steel cleaning basket is included as standard. The digital model adds heating from room temperature to 80 degrees C and a degas function, with a timer from 1 to 30 minutes. It is certified to CE, FCC, RoHS, UKCA, PSE and UL, and controlled by a digital panel with LED displays.
To request the full specification sheet or a sample, send an inquiry through the form on this page. Mob / WhatsApp / WeChat: +86 15920036975. Private label and OEM are available from 300 units, and units ship in neutral packaging.



