DS-D Digital Ultrasonic Cleaner 30L
Stainless steel tank with cleaning basket of the 10L digital ultrasonic cleaner
Drain valve detail of the 10L digital ultrasonic cleaner
Industrial ultrasonic transducers under the stainless steel tank
Ultrasonic cleaner cleaning metal parts in a basket
Ultrasonic cleaner cleaning a PCB board
Commercial Ultrasonic Cleaners

30L Digital Ultrasonic Cleaner with Heater and Degas

30L digital ultrasonic cleaner with heater, degas and drain valve. 600 W ultrasonic power, SUS304 tank — the largest bench model for heavy parts cleaning. OEM available.

Specifications

Capacity
30 L (7.9 gal)
Ultrasonic power
600 W
Heating power
600 W
Tank size
500 × 300 × 200 mm (19.7 × 11.8 × 7.9 in)
Unit size
530 × 330 × 330 mm (20.9 × 13.0 × 13.0 in)
Timer
1–30 minutes
Temperature
Room temperature to 80 °C
Tank material
SUS304 stainless steel
Degas
Yes
Basket
Stainless steel basket included
The DS-D 30L is a benchtop digital ultrasonic cleaner with heater and degas for workshops and service departments cleaning heavy parts and larger components. Its 600 W ultrasonic power, heating to 80 °C and 30 litre SUS304 tank lift oil, carbon deposits and polishing compound out of blind holes, threads and fine detail that brushes cannot reach.

600 W ultrasonic power from ten industrial transducers

Ten industrial-grade transducers bonded under the tank spread cavitation evenly across the full working volume, so this ultrasonic parts cleaner degreases carburettors, fuel injectors and machine components without dead spots or manual scrubbing.



One-piece SUS304 tank, drawn with no welds

The tank is pressed in one piece from 1.1 mm SUS304 stainless steel. With no welds or seams inside, there is nowhere for residue to hide, and the tank resists corrosion from daily detergent use in labs, clinics and workshops.



Heating to 80 °C with degas mode

Heat softens grease and dried contaminants so the ultrasonic action works faster, while degas mode sweeps dissolved air out of fresh solution for a more even clean on intricate parts.

Digital control and a drain valve for daily work

LED displays and push-button controls set the timer from 1 to 30 minutes and the temperature at a glance. A side drain valve empties the tank without lifting it, and the stainless steel basket is included for loading parts safely.



What it cleans

Workshops and remanufacturers degrease engine parts, gearboxes components, moulds and dies; repair shops use it as an ultrasonic cleaner for carburettor and injector cleaning at batch scale; laboratories and clinics clean larger instruments and trays.


Built for Daily Use

The tank is a one-piece SUS304 stainless steel tank, stamped in one piece with no welds inside, so residue has nowhere to hide. Transducers bonded under the tank bottom spread cavitation evenly, and the stainless steel cleaning basket is included as standard. The digital model adds heating from room temperature to 80 degrees C and a degas function, with a timer from 1 to 30 minutes. It is certified to CE, FCC, RoHS, UKCA, PSE and UL, and controlled by a digital panel with LED displays.
The tank handles hardware parts, moulds and workshop tools, cleaning several pieces in one load instead of one at a time. For dental and medical instruments, ultrasonic cleaning is a pre-cleaning step before disinfection and sterilisation, not a substitute for them. Carburettors and fuel injectors benefit from the same full-volume cavitation, with solution reaching internal passages that a brush cannot reach.


Workshops use the 30L tank for batch washing.
To request the full specification sheet or sample, send an inquiry through the form on this page. Mob / WhatsApp / WeChat: +86 15920036975. Private label and OEM are available from 300 units, and units ship in neutral packaging.

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.