A 50L digital ultrasonic cleaner with SUS304 tank on casters
Industrial ultrasonic transducers bonded under a stainless steel tank
Ultrasonic cleaner cleaning metal parts in a basket
Ultrasonic cleaner cleaning a PCB board
Commercial Ultrasonic Cleaners

50L Digital Ultrasonic Cleaner with Heater

50L digital ultrasonic cleaner with heater and casters. 840 W power, SUS304 tank — for large parts, moulds and heavy workshop degreasing. OEM from 300 units.

Specifications

Capacity
50 L (13.2 gal)
Ultrasonic power
840 W
Heating power
1500 W
Tank size
565 × 365 × 268 mm (22.2 × 14.4 × 10.6 in)
Unit size
595 × 395 × 525 mm (23.4 × 15.6 × 20.7 in)
Timer
1–30 minutes
Temperature
Room temperature to 80 °C
Tank material
SUS304 stainless steel
Degas
Yes
Basket
Stainless steel basket included
The DS-D50 is a 50 litre digital ultrasonic cleaner with heater, built for large and heavy parts that no bench model can take. With 840 W of ultrasonic power, 1500 W of heating and a deep SUS304 tank on casters, it strips oil, carbon and machining residue from components up to half a metre long.

840 W ultrasonic power for heavy soil


High-power transducers bonded under the deep tank keep cavitation strong through a full load, so this industrial ultrasonic cleaner degreases engine blocks components, large moulds and dies without pre-soaking or manual scrubbing.



One-piece SUS304 tank, drawn with no welds

The tank is pressed in one piece from SUS304 stainless steel. With no welds or seams inside, there is nowhere for residue to hide, and the tank resists corrosion from daily detergent use.

Heating to 80 °C with degas mode

Heat softens heavy grease and dried contaminants so the ultrasonic action works faster, while degas mode sweeps dissolved air out of fresh solution for an even clean across large surfaces.


Digital control, casters and a full-size basket

LED displays set the timer from 1 to 30 minutes and the temperature at a glance. Caster wheels let one person move the unit between workstations, and the stainless steel basket is included for loading heavy parts safely.

What it cleans

Workshops and remanufacturers clean engine and gearbox parts, large moulds and dies, printing and textile components, and batches of smaller parts in a single load. It is the step up when a 30L bench ultrasonic parts cleaner is no longer big enough.

Workshops use the 50L tank for batch washing of hardware parts, moulds and workshop tools, cleaning several pieces in one load instead of one at a time. For dental and medical instruments, ultrasonic cleaning is a pre-cleaning step before disinfection and sterilisation, not a substitute for them. Carburettors and fuel injectors benefit from the same full-volume cavitation, with solution reaching internal passages that a brush cannot reach.

Built for Daily Use


The tank is a one-piece SUS304 stainless steel tank, stamped in one piece with no welds inside, so residue has nowhere to hide. Transducers bonded under the tank bottom spread cavitation evenly, and the stainless steel cleaning basket is included as standard. The digital model adds heating from room temperature to 80 degrees C and a degas function, with a timer from 1 to 30 minutes. It is certified to CE, FCC, RoHS, UKCA, PSE and UL, and controlled by a digital panel with LED displays.
To request the full specification sheet or a sample, send an inquiry through the form on this page. Mob / WhatsApp / WeChat: +86 15920036975. Private label and OEM are available from 300 units, and units ship in neutral packaging.

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.