




Commercial Ultrasonic Cleaners
6L Digital Ultrasonic Cleaner with Heater and Degas
6L digital ultrasonic cleaner with heater and degas. 180 W ultrasonic power, SUS304 one-piece tank — for vinyl records, carburettors, dental and lab use. OEM available.
Specifications
- Capacity
- 6 L (1.6 gal)
- Ultrasonic power
- 180 W
- Heating power
- 300 W
- Tank size
- 300 × 150 × 150 mm (11.8 × 5.9 × 5.9 in)
- Unit size
- 325 × 175 × 275 mm (12.8 × 6.9 × 10.8 in)
- Timer
- 1–30 minutes
- Temperature
- Room temperature to 80 °C
- Tank material
- SUS304 stainless steel
- Degas
- Yes
- Basket
- Stainless steel basket included
The DS-D 6L is a benchtop digital ultrasonic cleaner with heater and degas, sized for benches where space matters and parts are small. Its 180 W ultrasonic power, heating to 80 °C and 6 litre SUS304 tank lift oil, polishing compound and flux residue out of blind holes, threads and fine detail that brushes cannot reach.
180 W ultrasonic power from three industrial transducers
Three industrial-grade transducers bonded under the tank spread cavitation evenly across the working volume, so this ultrasonic parts cleaner degreases small components, carburettors and fuel injectors, nozzles and fittings without dead spots or manual scrubbing.

One-piece SUS304 tank, drawn with no welds
The tank is pressed in one piece from 1.1 mm SUS304 stainless steel. With no welds or seams inside, there is nowhere for residue to hide, and the tank resists corrosion from daily detergent use in labs, clinics and workshops.

Heating to 80 °C with degas mode
Heat softens grease and dried contaminants so the ultrasonic action works faster, while degas mode sweeps dissolved air out of fresh solution — the setting that makes this digital ultrasonic cleaner effective on fine jewellery chains, watch parts and optical components with intricate detail.
Digital control for daily work
LED displays and push-button controls set the timer from 1 to 30 minutes and the temperature at a glance, and the stainless steel basket is included for loading small parts safely.
What it cleans
Dental and medical users clean instruments, burs and prosthetic parts before sterilisation; repair shops use it as an ultrasonic cleaner for carburettor, injector and chain cleaning; record collectors clean vinyl LPs in it with a suitable rack; laboratories use it as a laboratory ultrasonic cleaner for glassware, nozzles and precision components. Glasses and sunglasses frames, rings, earrings and watch straps benefit from the same gentle cavitation. Tattoo studios use the 6L tank for tattoo tools and grips as a pre-cleaning step before disinfection and sterilisation; ultrasonic cleaning is a pre-cleaning step, not a substitute for disinfection or sterilisation. Small engine workshops clean fuel injectors, carburettor small parts and circuit boards in the basket, where the solution reaches passages a brush cannot reach.
Built for Daily Use
The tank is a one-piece SUS304 stainless steel tank, stamped in one piece with no welds inside, so residue has nowhere to hide. Transducers bonded under the tank bottom spread cavitation evenly, and the stainless steel cleaning basket is included as standard. The digital model adds heating from room temperature to 80 degrees C and a degas function, with a timer from 1 to 30 minutes. It is certified to CE, FCC, RoHS, UKCA, PSE and UL, and controlled by a digital panel with LED displays.
To request the full specification sheet or a sample, send an inquiry through the form on this page. Mob / WhatsApp / WeChat: +86 15920036975. Private label and OEM are available from 300 units, and units ship in neutral packaging.



