An ultrasonic cleaner with 6-level adjustable power
Industrial ultrasonic transducers bonded under a stainless steel tank
Ultrasonic cleaner cleaning a PCB board
Ultrasonic cleaner cleaning metal parts in a basket
Commercial Ultrasonic Cleaners

Adjustable Power Ultrasonic Cleaner — 1.3L to 30L

Ultrasonic cleaner with 6-level adjustable power, heater and SUS304 tank, 1.3L to 30L — gentle on delicate parts, strong on grease. OEM from 300 units.

Specifications

Capacity
1.3–30 L by model
Ultrasonic power
60–600 W by model
Power adjustment
6 levels
Heating power
100–600 W by model
Timer
1–30 minutes
Temperature
Room temperature to 80 °C
Tank material
SUS304 stainless steel
Basket
Stainless steel basket included
Packaging
Neutral packaging
Private label
OEM / private label from 300 units
Certifications
CE, FCC, RoHS, UKCA, PSE, UL
The DS-S series is an ultrasonic cleaner with 6-level adjustable power, heating and a SUS304 tank, in nine sizes from 1.3 to 30 litres. One control idea covers the whole range: turn the power down for delicate parts, turn it up for grease and carbon.
Full per-model dimensions are in the specification sheet we send with every quotation.

Six power levels, one machine for mixed work

Full ultrasonic power is not always the right power. Lower levels protect polished surfaces, electronic assemblies and fine jewellery; higher levels strip oil and carbon from metal parts. An adjustable power ultrasonic cleaner lets one bench handle both.

Heating to 80 °C

Heat softens grease and dried contaminants so the ultrasonic action works faster at every power level, and the timer runs from 1 to 30 minutes for repeatable cycles.

One-piece SUS304 tank, drawn with no welds

Every size uses a tank pressed in one piece from SUS304 stainless steel, with no welds or seams inside to trap residue, and a stainless steel basket is included.


Nine sizes from 1.3 to 30 litres

Choose the tank that fits your largest part with room for solution to circulate: 1.3, 2, 3, 4.5, 6, 10, 15, 22 and 30 litres, each with heating sized to the tank.

What it cleans

Laboratories clean glassware and instruments; electronics benches clean PCB assemblies at low power; jewellery and watch workshops clean delicate pieces gently; repair shops degrease carburettors, injectors and chains at full power.

Where the DS-S fits

In auto repair workshops, the DS-S cleans carburettors, fuel injectors and small engine parts, lifting carbon, oil and varnish from bores and jets that brushes cannot reach. Hardware workshops use it for bolts, fittings, gears and hand tools, removing cutting fluid, grease and shop dust before assembly or inspection. Jewellery and watch workshops clean rings, chains and watch parts at a low power level, where the gentle setting protects polished surfaces and settings. Electronics benches clean printed circuit boards and small assemblies at low power, clearing flux residue and dust from between components. Laboratories clean glassware, beakers and instruments, and dental and medical users clean instruments before sterilisation, where cleaning is a pre-sterilisation step and not a substitute for sterilisation itself.

Using the six power levels

Choose the level by the part in front of you, not by habit. Start low for polished metal, plated finishes, jewellery and circuit boards, and step up only if the soil remains. Use the middle levels for everyday workshop parts, tools and hardware with ordinary grease and dust. Use the highest levels for heavy carbon on carburettors and injectors and dried oil on engine parts. The heater, adjustable from room temperature to 80 C, softens grease first, so a lower power level often does the work. Set the 1-30 minute timer for the same cycle each time, so results repeat from one batch to the next.

Ready for commercial orders

The DS-S carries CE, FCC, RoHS, UKCA, PSE and UL certifications, and every size ships in neutral packaging with a stainless steel basket included. Private label and OEM orders start from 300 units, so distributors and retail brands can put their own name on the machine and the carton. Nine sizes, from 1.3 to 30 litres, cover a single workbench and a full workshop line from the same range.




To request the full specification sheet or a sample, send an inquiry through the form on this page. Mob / WhatsApp / WeChat: +86 15920036975. Private label and OEM are available from 300 units, and units ship in neutral packaging.


Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.