




Vinyl Record Ultrasonic Cleaner with Auto-Rotating Bracket — 6L
Vinyl record ultrasonic cleaner with auto-rotating bracket: 180 W at 40 kHz, 300 W heating and a 6 L SUS304 tank. Digital and mechanical versions for record shops, hi-fi retailers and vinyl services. OEM and private label from 300 units.
A record can look clean and still play with crackle. Dust, smoke film and handling grease settle deep in the groove, where a brush only pushes them around. This vinyl record ultrasonic cleaner lifts contamination out of the groove with high-frequency cavitation, while a motorised bracket turns a stack of LPs slowly through the bath. Every section of both sides gets the same deep, contact-free clean, with no scrubbing on the playing surface.
1. 180 W of 40 kHz ultrasonic power
Three transducers deliver 180 W of ultrasonic power at 40 kHz, the frequency record-cleaning machines use to work dirt out of fine grooves without harming the vinyl. The 300 mm tank takes 12-inch LPs on the bracket, and the cavitation reaches the whole immersed surface evenly, so a batch comes out uniformly clean instead of clean in patches.
2. Auto-rotating bracket for hands-free cycles
Records clamp onto the bracket by the centre, behind a cover disc that shields the label, and the motor turns the stack slowly through the solution. There is nothing to hold and nothing to wipe: load the records, set the cycle and let the machine work. The bracket lifts off in seconds, and it is also available on its own for buyers who already run a 6 L tank.
3. Heated bath with digital control
A 300 W heater brings the bath up to temperature and holds it anywhere from 0 to 80 °C, which helps the solution loosen greasy film and fingerprints faster. The digital panel shows temperature and time on separate displays, with a timer from 0 to 30 minutes, so staff can run the same cycle every time instead of guessing.
4. SUS304 tank with drain valve
The tank is SUS304 stainless steel: it resists corrosion from cleaning solutions and wipes down in seconds. A stainless drain valve empties the bath without lifting a full tank, anti-slip feet keep the unit planted on the bench, and a stainless basket is included for cleaning small parts when the bracket is off.
5. Two versions, export-ready plugs
Choose the digital version with the auto-rotating bracket for a complete record-cleaning station, or the mechanical knob version for simple two-dial control. Units run on 110 V or 220 V and ship with US, EU, UK, AU or JP plugs, so the same model serves record shops and hi-fi retailers in every major market.
Built for record shops and vinyl services
Record shops use it to clean used stock before grading and pricing, and to offer record cleaning as a paid service at the counter. Hi-fi retailers demo second-hand turntables with properly cleaned vinyl, and DJ and collector services run it as a bench machine for batch work. Lift the bracket off and the same 6 L tank doubles as a standard bench-top ultrasonic cleaner for small parts, which makes it an easy add-on line for audio and hi-fi distributors.
Request the full specification sheet
Tell us what you need to clean, and we will reply with the full specification sheet and a quotation. Private label and OEM are available from 300 units, and units ship in neutral packaging.
| Model | DS-R |
| Capacity | 6 L |
| Ultrasonic power | 180 W |
| Heating power | 300 W |
| Frequency | 40 kHz |
| Transducers | 3 |
| Tank size | 300 × 150 × 150 mm |
| Unit size | 325 × 180 × 280 mm |
| Timer | 0–30 min |
| Temperature | 0–80 °C |
| Power supply | 110/220 V, US/EU/UK/AU/JP plugs |
| Private label | From 300 units |



